Improve home safety (annual maintenance)
Having your installation checked once a year prevents faults, reduces electrical risks and extends the life of your equipment. At Inmatelec (Rota and the Bay of Cádiz) we carry out a technical inspection with certified measurements and provide a clear report with prioritised actions (critical / important / preventive).
What does our annual maintenance include?
- Consumer unit
- Visual inspection, cleaning and tightening of terminals.
- Checking circuit labelling and DIN rail space for future additions (air conditioning, solar PV, EV).
- Checking ratings and trip curves of miniature circuit breakers (PIAs).
- Residual current devices (30 mA)
- Testing with an instrument (trip time and current).
- Verifying selectivity where there are several residual current devices (wet areas, kitchen, EV).
- Surge protection devices (SPDs)
- Checking status indicators (T1/T2 and permanent indicators).
- Coordination with the other protective devices and a replacement recommendation where appropriate.
- Earthing and continuity
- Measuring earth resistance.
- Verifying the continuity of protective conductors (PE).
- Circuit insulation
- Measurements between live / neutral / earth to detect leakage or insulation deterioration.
- Thermography at critical points
- Detecting abnormal overheating in circuit breakers, busbars, terminals and high-load connections.
- Socket outlets and lighting
- Checking socket outlets, visible joints and outdoor/wet areas (IP rating and watertightness).
- If you have emergency lighting, testing its operation and basic autonomy.
- Special loads
- Checking consumption and protective devices for the water heater, air conditioning, oven, hob and, if present, the charging point.
Benefits for your home
- Safety: reduces the risk of short circuits, overheating and indirect contact.
- Savings: preventing a serious fault is much cheaper than repairing it.
- Reliability: equipment protected against surges and unexpected tripping.
- Preparation: distribution board ready for adding solar PV services or an EV charger without surprises.
Warning signs (request an inspection if you notice these)
- Frequent tripping of the residual current device or any miniature circuit breaker.
- Burning smell, covers or circuit breakers hot to the touch.
- Flickering or dimming lights when high-power appliances are switched on (oven, air conditioning).
- Red indicator on the SPD or blackened terminals/cables.
Your part: a mini monthly checklist (1 minute)
- Press the TEST button on each residual current device: it should trip (switch it back on afterwards).
- Check the SPD indicator: if it is red, let us know.
- Check that there are no unusual smells, buzzing noises or overheating in the consumer unit.
Deliverables on completion
- Technical report including:
- Earthing values, insulation, RCD test results and relevant thermal images.
- List of issues with priorities (critical / important / preventive) and an improvement plan.
- Get a quote for remedial work (if required) and the recommended date for the next inspection.
Tip: Always leave DIN rail space free and keep the labelling up to date. This makes future extensions (air conditioning, PV, EV) easier and reduces intervention times.
CTA: Would you like your installation to be inspected and certified?? Schedule your annual maintenance with Inmatelec and receive a clear report with measurements and prioritised recommendations.










